RUVO 2008 Vertical Door Loader
Unloading / Stacking Equipment
|
The
RUVO
2008
Vertical Door Loader
employs a mar-proof clamping system which
automatically adjusts to almost any type or door
size. The table tilts down to orient the door
vertically at a height compatible with the Ruvo
505 Vertical Door Machine. Doors picked by the
house lot are placed on skids and moved into
position adjacent to the Ruvo 2008 machine.
Next, the machine lifts a door from the top of
the stack and places it on the table. Then, the
table tilts down to a vertical position to have
the door ready to load into the Ruvo 505 Door
Machine.
MAR PROOF CLAMPING The 2008 Loader employs a mar-proof clamping system which automatically adjusts to almost any type or door size. PROCESS CONTROLLER All machine functions are controlled with a highly intelligent process controller which enables: -- Full automatic or Manual mode -- Increased machine versatility -- Approximately 45 second cycle time DUAL CHAIN DRIVES Gantry operation is achieved by using heavy duty dual chain drive mechanisms MACHINE SPECIFICATIONS: Stack Capacity 7' (including skid approximately) Door Size Max 4' x 8' Door Size Min 1 ½' x 4' Electrical Standard 120 volts, 1PH, 15 Amps Controls Process Logic Controller Air Requirements 5.0 CFM @ 90 PSI (½" Airline) Machine Size 10'W x 10'D x 11'H *All specifications are subject to change without notice* |
