The Ruvo 9696 Machine is manufactured to last under heavy use and is possibly the finest available to competitive steel and wood door suppliers. The heavy duty, easily operated cantilever cutting arm is key to the model’s speed and efficiency. After the lite template and door are pneumatically clamped, its arm then follows the template edges as an oscillating 1/2" cutter bores through the door at approximately 4 inches per second. The optional lock and boring and faceplate mortising features provide complete door machining center capabilities at an exceptionally low cost.

SPECIFICATIONS:
Max Door Size: Door Height 8’
Door Width 3’
Max Lite Sizes: In 3’0"Door 30"X 76" or 24" X 82"
Lock Sizes : Standard 1 1/2", 1 5/8", 2 1/8"*
Dead Bolt Sizes: Standard 1 1/2", 1 5/8", 2 1/8"*
Corner Radius: Standard 1/4"( Both Lite and Faceplate) Backset: Selected 2 3/8"and 2 3/4"
Machine Size: 112"L X 70"W X 67"H
Shipping Wt. 1400-1500 lbs approx.

ELECTRICAL:
240 Volts, 3 Phase 30 Amps
Optional 208 Volts, 30 Amps
480 Volts, 15 Amps
Air Requirements 1.00 CFM @ 100 psi
80-100 psi @ machine with 1/2" feeder air line

*All specifications are subject to change without notice*